Shuttle P2500T- Compact All-in-One PC for POS and control applications

• Fanless and silent
  Passive heatpipe cooling, no fan noise at all
  Perfect to be used in noise-sensitive environments
  Fanless, dust-free and thus virtually maintenance-free
• 24/7 nonstop operation
  This device is approved for 24/7 permanent operation.
  Requirements:
  - Free circulation of air amongst the PC must be guaranteed.
  - Ventilation holes must be kept clear.
  - If a hard disk is installed, this must also be approved for permanent operation by its manufacturer.
• IP54 protected
  The front panel is dust-protected and protected from 
  splashing of water according to protection class IP54.
• Chassis
  Colour: black
  Dimensions: 29.9 x 20.7 x 5.9 cm (W x H x D)
  75x75 mm VESA mount capable
  Mounting hole for Kensington lock
  Weight: 1.95 kg net, 3.14 kg gross
• Operating system
  This system comes without operating system.
  It is compatible with:
  - Windows 10/11 - 64-bit
  - Linux - 64-bit
• Touchscreen
  Touchscreen function supports fingertip input
  Capacitive Touch Panel with 10-point multi-touch
  Supports input with gloves (PVC, cotton, cotton/linen)
  Stylus pen not supported
• 29.5 cm display (11.6")
  29.5 cm / 11.6" LCD TN display
  Aspect ratio: 16:9 widescreen
  Resolution: 1366 x 768 = 1.05 Megapixel
  Backlight unit: LED, Luminance: 250 cd/sqm (typ.)
  Glass thickness: 3 mm
• Processor
  Model: Intel N100
  System-on-a-chip architecture (SoC): no chipset required
  FCBGA1264 package - directly soldered onto the mainboard
  Code name: Alder Lake-N  (12th Generation Intel Core)
  Cores / Threads: 4 / 4
  Turbo clock rate: max. 3.4 GHz
  Smart Cache: 6 MB
  TDP wattage: 6 W
  Manufacturing process: Intel 7
  Maximum Tjunction Temperature: 105 °C
• Integrated Graphics
  Intel UHD Graphics
  GPU clock frequency: max. 750 MHz
  Execution Units (EUs): 24
  Supports DirectX 12.1
• Up to three displays simultaneously
  Two video ports support two additional independent screens:
  1) HDMI 2.0b supports 3840 x 2160 @ 60 Hz
  2) VGA / D-Sub analog video supports 1920 x 1080 @ 60 Hz
  Special conditions for operation in Multi-Monitor mode:
  1) Clone mode: all displays show the same content at 1366x768 resolution
  2) Extended mode: all displays show different content
• BIOS
  AMI BIOS in 32 MByte EEPROM with SPI interface
  Supports Power fail resume / always on
  Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states
  Supports hardware monitoring and Watchdog functionality
  Supports Firmware TPM v2.0 functionality
• Memory
  1x SO-DIMM slot with 262 pins
  Supports DDR5-4800 (PC5-38400) SDRAM at 1.1 V
  or DDR5 memory with higher clock rate
  Supports a maximum capacity of 16 GB
• Hard disk drive / SSD
  Supports one SATA hard disk or one SATA SSD drive in 6.35 cm / 2.5" format
  The SATA 3.0 interface supports up to 600MB/s data transfer speed (6 Gbit/s)
  Supports one drive with up to 9.5 mm in height
  SATA cable pre-installed
• M.2-2280 Slot
  The M.2 2280 M slot provides the following interfaces:
  - PCI-Express Gen. 3.0 X2
  - SATA v3.0 (max. 6 Gbps)
  It supports M.2 cards with a width of 22 mm
  and a length of 80 mm (type 2280).
  Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe SSDs (with M key)
• Webcam
  Integrated Full HD webcam (1920 x 1080 pixels = 2 MP)
• Microphone and speakers
  With integrated Electret Condenser Microphone and 2 W speaker
• Integrated Audio
  Realtek ALC888S (HD-Audio)
  Two analog audio connectors (3.5 mm) on the left side: 
  1) Line-out (head-phones)
  2) Microphone input
  Digital multi-channel audio output is supported via HDMI.
• Wired Network
  Intel i226LM Ethernet Controller
  Supports 10 / 100 / 1.000 / 2500 Mbps operation
  Supports WAKE ON LAN (WOL) from S3/S4/S5 modes
  Supports network boot by Preboot eXecution Environment (PXE)
• Wireless Network (WLAN)
  Built-in M.2-2230-E WLAN card with two internal antennas
  WLAN Controller Realtek RTL8821CE
  Supports WiFi IEEE 802.11b/g/n/ac on the 2.4 / 5 GHz band, 1T1R
  Supports 20 / 40 / 80 MHz channel bandwidth
  Security: supports WPA(-PSK), WPA2(-PSK), WEP 64/128 bit, IEEE 802.11x, IEEE 802.11i
  Supports Bluetooth 4.2 on the 2.4 GHz band
• Opening holes for optional antennas
  The chassis features two perforated 6.5 mm holes
  for optional antennas mounted with an (RP-)SMA connector
  for wireless network such as WLAN
• Front LEDs
  Power LED (blue)
  Hard disk LED (orange)
• Connectors left side
  Power button
  2x USB 3.2 Gen 2 (type A, red, max. 10 Gbps)
  Audio Line-out / headphones (3.5 mm jack)
  Microphone input (3.5 mm jack)
  Hole with Clear CMOS button
• Connectors right side
  Mounting hole for Kensington lock
• Connectors bottom side
  HDMI 2.0b (supports digital video and digital audio)
  VGA connector (D-Sub 15 pol., analog video)
  4x USB 3.2 Gen 2 (type A, blue, max. 5 Gbps)
  2.5G Network (LAN, RJ45)
  2x COM port (RS232)
  DC input for external power adapter (5.5 / 2.5 mm)
• Jumper Configuration
  Jumper JP1 for power-on-after-power-fail (hardware solution) [1]
• Power adapter
  External 65 W power adapter (fanless)
  Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
  Output: 19 V DC, max. 3.42 A, max. 65 W
  DC cable, ca. 170cm, 5.5 / 2.5 mm plug
  AC cable, ca. 170 cm, 3-pin Micky MM C6 and Schuko earthed safety plug
• DC Input connector
  DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
  The DC-input of the computer supports an external
  power source with either 12V±5% and 19V±5%.
• Included Accessories:
  Quick Installation Guide
  Windows 10/11 Driver DVD
  External Power Adapter (65W / 19V) with 3-pin AC cable
• Optional Accessories:
  WLN-M1: WLAN kit with Intel AX200 WLAN card (supports WLAN-ax / Wi-Fi 6) and two external antennas
  Note: a WLAN-ac / Wi-Fi 5 module with two internal antennas is already pre-installed by default.
• Environmental criteria
  Operating temperature: 0~40 °C
  Humidity: 10~90 %, non-condensing
• Certification and Compliance
  EMI: CE, UKCA, FCC, BSMI, RCM, VCCI
  Safety: CB (IEC 60950/62368), cTUVus (UL 62368-1:2014), BSMI
  Other compliances: RoHS, ErP Lot3, Energy Star v8.0
• Conformity
  This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
  (1) 2014/30/EU relating to electromagnetic compatibility (EMC),
  (2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
  (3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP)
  (4) 2014/53/EU Radio Equipment Directive (RED)

[1] Power-on-after-power-fail
The BIOS setup provides a "Power-on-after-power-fail" function that can be found under "Power Management Configuration". As the name indicates, this function determines the PC's behaviour after power failure: (1) unconditional power-on, (2) restore former status or (3) keep system turned off. As a matter of the nature of this function, it may fail after short power failures. This is why this PC also comes with a hardware-based solution. By removing Jumper JP1 (on the mainboard near the power button) the system will start unconditionally once power is supplied.