- Fanless and silent
Completely fanless, virtually noiseless
Passive cooling through convective heat transfer
Perfect to be used in noise-sensitive environments
Fanless means less dust and thus virtually no maintenance is required
- 24/7 Nonstop Operation
This device is approved for 24/7 permanent operation.
- Free air circulation around the PC must be guaranteed.
- Ventilation holes must be kept clear.
- Any installed disk must also be approved for permanent
operation by its manufacturer
Slim PC with black chassis made of steel
Dimensions: 190 × 165 × 43 mm (LWH) = 1.35-litre
Weight: 0.8 kg net and 1.95 kg gross
Two holes for Kensington Lock and numerous
threaded holes (M3) at both sides of the chassis
- Operation Position
2) Vertical with mounted feet.
These feet can be purchased as optional accessory PS02.
3) Vertical (e.g. VESA-mounted behind an appropriate monitor)
In the vertical position, the front USB ports should point upward.
Ventilation holes must not be blocked to ensure sufficient cooling.
- Operation System
This system comes without an operating system.
It is compatible with
- Windows 10 (64-bit)
- Windows 11 (64-bit)
- Linux (64-bit)
Intel® Celeron® Processor N4505, Dual Core
CPU clock frequency: 2.0 GHz, max. Turbo frequency: 2.9 GHz
Code name: "Jasper Lake"
10 nm structure, FCBGA1338 package (soldered)
CPU cores / Threads: 2 / 2
L2 Cache: 4 MB
Thermal Design Power (TDP): 10 W
Supports x86-64, AES-NI, VT-x (EPT), VT-d, SSE4.2, AES
System-on-Chip processor (SoC) with an integrated graphics processor, no chipset required
- Integrated Graphics
The Graphics Processing Unit (GPU) is integrated into the processor
Intel® UHD Graphics (11th Gen), GPU frequency: 450~750 MHz
Supports DirectX 12, OpenGL 4.5, OpenCL 1.2, Intel Quick Sync Video, Intel Clear Video (HD)
Execution Units (EU): 16
Triple Display Support via three video outputs:
- HDMI 2.0b: max. 4096 × 2160 @ 60 Hz
- DisplayPort 1.4a: max. 4096 × 2160 @ 60 Hz
- D-Sub/VGA: max. 1920 × 1200 resolution @ 60 Hz
Supports two digital displays and one analog display simultaneously.
The D-Sub/VGA connector does not support the Hot Plug feature.
- UEFI Firmware
16 MB Flash ROM with AMI's Aptio UEFI BIOS Firmware
Based on the Unified Extensible Firmware Interface (UEFI)
Supports Power fail resume / AC power on state / always-on / always-off 
Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states
Supports boot up from external flash memory cards
With embedded Firmware TPM v2.0 (fTPM) 
CMOS battery (type CR2032)
- Memory Support
2× SO-DIMM slots with 260 pins
Supports DDR4-2933 (PC4-23466U) SDRAM at 1.2V
Supports Dual Channel mode
Supports max. 16 GB per DIMM
Maximum total size: 16 GB (either 1× 16 GB or 2× 8 GB)
Supports two unbuffered DIMM modules (no ECC)
- 2.5" Bay for Hard disk drive/SSD
Supports one drive in 6.35 cm / 2.5" format (hard disk or SSD)
Serial ATA III Interface with up to 600 MB/s transfer speed
Max. height 12.5 mm
Pre-installed SATA cable (data/power)
Supports Unified Extensible Firmware Interface (UEFI)
- M.2 expansion slot for SSD card
M.2 2280 BM slot
Interfaces: PCI-Express Gen. 3.0 X2 and SATA v3.0 (max. 6 Gbit/s)
Supports M.2 cards with a width of 22 mm
and a length of 42, 60 or 80 mm (type 2242, 2260, 2280)
Supports SATA SSDs (BM-Key) or NVMe PCIe SSDs (M-Key)
- Integrated Audio
Realtek ALC897 / ALC662 / ALC888S Audio Codec
Two analog audio connectors (3.5 mm):
1) Line out (head-phones)
2) Microphone input
Digital multi-channel audio output: via HDMI and DisplayPort
- Card Reader
Integrated card reader
supports standard SD, SDHC and SDXC memory flashcards
Controller: Genesys GL9750 SD Host Controller
- Wired Network
RJ45 connector supports Gigabit LAN at 10/100/1000 Mbit/s.
Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
- LEDs and Buttons
Power LED (blue)
HDD LED (yellow)
- Front Panel Connectors
2× USB 3.2 Gen 2 Type-A (red)
SD card reader
Audio line-out (headphones)
- Back Panel Connectors
HDMI 2.0b digital video and audio output
DisplayPort 1.2 digital video and audio output
D-Sub/VGA analog video output (15-pin) - no hotplug
2× USB 3.2 Gen 1 Type-A (blue)
2× USB 2.0 Type A
Gigabit network (LAN, RJ45)
2× RS232 serial port, 9-pin D-Sub (support of an auxiliary voltage of 5/12 V,
the left port is switchable to RS422 / RS485) 
DC input for the external power adapter
4-pin connector (2.54 mm pitch) supports
- external power on button
- Clear CMOS function
- +5V DC voltage for external components
2× perforation for optional Wireless LAN antennas
- Other Onboard Connectors
Connectors COM1/COM2 for serial ports (occupied)
Jumper JP2 for power-on-after-power-fail (hardware solution) 
USB 2.0 header (4-pin) required for WWN03 accessory
- Power Supply
External 40 W AC/DC power adapter (fanless)
AC Input: 100 ~ 240 V AC, 50 ~ 60 Hz
DC Output: 19 V / 2.1 A
Automatic AC voltage adjust
Dimensions: ca. 95 × 42 × 29 mm (LWH)
DC cable length: ca. 170 cm
AC cable length: ca. 170 cm (with 2-pin Europlug)
- DC Input connector
DC Connector: 5.5 / 2.5 mm (outer/inner diameter)
The DC-input of the computer supports an external power source
with either 12 V ±5% (max. 2.1 A) or 19 V ±5% (max. 3.33 A).
- Supplied Accessories
Multi-language user guide (EN, DE, FR, ES, JP, KR, SC, TC)
VESA mount for 75 / 100 mm standard (two metal brackets)
Four screws M3 × 5 mm (screws together VESA mount and PC)
Four screws M4 × 10 mm (to affix VESA mount on the PC)
Four screws M3 × 4 mm (to mount a 2.5" storage into the bay)
Two screws M3 × 5 mm (to mount some M.2 cards)
Driver DVD (Windows 64-bit)
External 40 W power adapter with power cord (Europlug)
- Optional Accessories:
- PS02: optional stand for vertical operation
- CXP01: adapter cable for the external power button
- PRM01: 2U/19" rack-mount front plate for two Shuttle XPC slim PCs
- DIR01: DIN-Rail mounting kit
- WLN-M. WLAN module in M.2-2230 format supports IEEE 802.11ac and Bluetooth 4.0 with two external antennas.
- WWN03: LTE kit with an adapter card, 2 antennas and antenna cables. Supports one M.2 LTE module and one nano SIM card 
- Environmental Specifications
Operating temperature range: 0 ~ 40 °C
Relative humidity range: 10 ~ 90 % (non-condensing)
- Certification and Compliance
EMI: FCC, CE, BSMI, RCM, VCCI
Safety: CB, BSMI, ETL
Other: RoHS, Energy Star, ErP
This device is classed as technical information equipment (ITE) in class B and is intended for use in the living room and office. The CE-mark approves the conformity by the EU directives:
(1) 2004/108/EC relating to electromagnetic compatibility (EMC),
(2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD),
(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP)
 Optional LTE support
Shuttle provides the optional "Shuttle Accessory WWN03" which consists of an adapter card, two antennas plus 20 cm antenna cables. The WWN03 adapter card occupies the 2.5" drive bay so that no more 2.5" SATA devices can be installed. The 3G/LTE card must have M.2-3042 Key B format with MHF IV (I-PEX4) connectors for the antenna. In addition, it supports one Nano-SIM card (Mini and Micro format is not supported). The required 3G/LTE card and SIM card are not included in WWN03.
 How to convert DisplayPort into HDMI/DVI
The DisplayPort output can be converted to HDMI or DVI by an additional, passive adapter cable. For example:
DELOCK 82590: 1 m, DisplayPort (male, 20p) to HDMI-A (male, 19p)
DELOCK 82435: 5 m, DisplayPort (male, 20p) to DVI-D (male, 24p)
The integrated graphics automatically detect the connected display and puts out the appropriate electric signal - either through DisplayPort (without an adapter) or HDMI/DVI (with an adapter).
However, a monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple, passive adapter.
The BIOS setup provides a "Power-on-after-power-fail" function that can be found under "Power Management Configuration". As the name indicates, this function determines the PC's behaviour after power failure: (1) unconditional power on, (2) restore former status or (3) keep system turned off. As a matter of the nature of this function, it may fail after short power failures. This is why the Shuttle XPC slim Barebone DL10J also comes with a hardware-based solution. By removing Jumper JP1 (on the mainboard behind the D-Sub/VGA port) the system will start unconditionally once power is supplied.
 Serial Ports
This PC features two serial RS232 ports with 9-pin D-Sub connectors on the back panel. The left COM port (COM1) can also be configured as RS422 and RS485 in the BIOS setup.
Pin 9 of the D-Sub COM-Port is a multi-functional signal. Based on the Jumper JP2 configuration on the mainboard, it can be configured as Ring Indicator (RI) or external power supply with a voltage level of either 5 V or 12 V. Each COM port can be configured separately. The maximum current is 500 mA per connector.
 TPM Function
This product features Firmware-TPM (fTPM) v2.0. Besides this, it is prepared for a hardware TPM chip which can be fitted by the factory on request if required.
- Fanless and silent
Taille écran Non Alimentation Non Dimensions Non Chipset Non Processeur Non Mémoire Non Baie de stockage Non Lecteur Optique Non Slot extension interne Non Contrôleur de Stockage Non Raid Non Contrôleur graphique Non Contrôleur réseau Non Inteface PS2 Non Ports externes Non Audio Non Connecteurs façade Non Accessoires Non Garantie Shuttle Non Format Slim