- Description
-
Détails
Chassis
Slim 3.5-litre chassis, colour: black
Dimensions: 238 x 200 x 72.5 mm (LWH without rubber feet) = ca. 3.5-litre
Height including rubber feet: 73.3 mm
Weight: 2.2 kg net, 3.5 kg gross
Open front - without covers for optical drive and front panel connectors
Hole for Kensington Lock at the backpanel
Operation position horizontal or even vertical with the optional stand PS01- Power Adapter
External 120 W power adapter (fanless)
Input: 100~240 V AC, 50/60 Hz
Output: 19 V DC, max. 6.32 A, max. 120 W output wattage
DC Connector: 5.5 / 2.5mm (outer/inner diameter)
AC mains cable: 3 pins, ca. 1.8 m length, with C5/C6 coupler (called "Mickey Mouse" or "Clover-leaf") for the power adapter and CEE-7/7 plug with earth-contact (type E+F) for the power outlet
Remark: the DC-input of the computer supports an external power source with either 12V±5% or 19V±5%.- Operating System
This system comes without operating system.
It is compatible with Windows 10/11 and Linux (64-bit)- Processor support
Processor Socket LGA1700
Supports Intel Core i9 / i7 / i5 / i3, Pentium Gold and Celeron processors
Supports 12th generation Intel Core processors, codename "Alder Lake-S" in 14 nm process technology
Supports processors with integrated graphics only [5]
Maximum supported processor power consumption (TDP) = 65 W
Does not support the unlock-function of Intel K-Series processors.
The processor integrates PCI-Express, memory controller
and the graphics engine on the same die.
(Performance features depend on processor type)
Please refer to the support list for detailed processor support information at global.shuttle.com.- Processor heat-pipe cooling
Processor cooling with heat-pipe technology and two fans (6cm)- Mainboard / Chipset / BIOS
Mainboard in Mini-ITX form factor 17 x 17 cm
Chipset: Intel® H610
AMI BIOS in 32 MB EEPROM
All capacitors are high quality solid capacitors
Supports hardware monitoring and Watchdog functionality
Supports Unified Extensible Firmware Interface (UEFI)
Supports power on after power failure [1]
Supports Firmware TPM v2.0 (fTPM)- Memory support
2x SO-DIMM slot with 260 pins
Supports DDR4-3200/2933/2666/2400/2133 (PC4-25600/23466/21300/19200/17000) SDRAM at 1.2 V
Supports Dual Channel mode
Supports a maximum of 32 GB per DIMM,
maximum total size: 64 GB
Supports two unbuffered DIMM modules (no ECC or registered)- Integrated Graphics
The features of the integrated Intel UHD graphics function
depend on the processor type used [5].
The PC features three video outputs:
- 1x HDMI v2.0b (supports 1080p/60 and 2160p/60)
- 1x DisplayPort v1.4a (supports 1080p/60 and 2160p/60)
- 1x Analog VGA (15-pin D-Sub, supports 1080p/60)
Supports three independent displays simultaneously with the integrated graphics function.
Hardware video decoding/encoding: H.264, H. 265 (8- and 10-bit, encoding via QuickSync), VP9 (10-bit VP9 can only be decoded)- 5.1-channel audio
Audio Realtek® ALC 897/662/888 High-Definition Audio
Three analog audio connectors (3.5mm) at the backpanel:
1) Front line-out (head-phones)
2) Rear Surround line-out (shared with microphone input)
3) Center line-out (shared with line-in)
Digital multi-channel audio output: by HDMI and DisplayPort- Dual LAN Controller
Dual network with two RJ45 ports with two status LEDs each
- yellow LED: lights up when data transfer is active
- greed LED for speed mode: off at 10 Mbps, lights up when 10 Mbit or higher
Used network chips:
1) Intel 225 supports 100 / 1.000 / 2.500 Mbps data transfer rate
2) Intel 219LM supports 10 / 100 / 1.000 Mbps data transfer rate
PCIe interface
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)- M.2-2280M SSD slot
The M.2 2280M slot provides the following interfaces:
- PCI-Express Gen. 3.0 X4, supports NVMe
- SATA v3.0 (max. 6 Gbps)
It supports M.2 cards with a width of 22 mm
and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
Supports M.2 SSDs with SATA or PCI-Express interface- M.2-2230E slot for WLAN cards
Interfaces: PCI-Express Gen. 2.0 X1 und USB 2.0
Supports M.2 cards with a width of 22 mm and a length of 30 mm (type 2230)
Supports WLAN expansion cards
Optional Shuttle accessory: WLN-M / WLN-M1 [4]- Drive connectors
3x Serial-ATA connector, max. 6 Gbps
Supports NCQ and AHCI- Storage Bays
This system features three drive bays:
1) supports one optical drive (ODD) in 5.25" slimline format with 12.7 mm height - this bay can alternatively be used for a 2.5" drive
2) upper 2.5" bay supports one 2.5" drive with max. 12.5 mm height
3) lower 2.5" bay supports one 2.5" drive with max. 9.5 mm height
The system includes the following pre-installed cables:
- 2x Power cable for 2.5" drives (5 Volt [6])
- 1x SATA cable for one 2.5" drive
- 1x combo connector (SATA and power) for an optical slimline drive (DVD or Blu-ray)
Note: This system is ready for one 2.5" drive (SSD or hard disk) and one optical drive in slimline format to be installed.
For further 2.5" drives, additional SATA cables are required. For a possible third 2.5" drive also four screws M3x4 are required.
The optional accessory PHD4 allows the installation of a 3.5" hard disk [8].- Front Panel connectors
Microphone input
Audio Line-out (headphones)
1x USB 3.2 Gen 1 Type A ( max. 5 Gbps, blue)
1x USB 3.2 Gen 1 Type C ( max. 5 Gbps)
2x USB 2.0 (black)
Power button
Power LED (blue)
HDD LED (yellow)- Back Panel connectors
1x DisplayPort 1.4a audio/video output [2]
1x HDMI 2.0b audio/video output
1x Analog VGA video output (15-pin D-Sub)
2x USB 3.2 Gen 1 Type A (max. 5 Gbps, blue)
2x USB 2.0 (black)
2x RJ45 LAN (1 Gbps and 2.5 Gbps)
1x COM (RS232) - on the right side
1x COM (RS232/422/485) - middle/down
3x Audio 3.5mm (Line-in, Line-out, Mic-in)
1x DC-input connector for external power adapter (supports 12V±5% or 19V±5%)
1x 4-pin connector (2.54 mm pitch) supports:
- external power on button (see optional accessory CXP01)
- Clear CMOS function
- +5V DC voltage for external components
2x Perforation for Wireless LAN antennas
1x Hole for Kensington Lock- Other onboard connectors
Jumper J4 for power-on-after-power-fail (hardware solution) [1]
Front connectors for power button, LEDs, USBs, audio ports
USB 2.0 headers (4-pin)
4x RS232 COM port (2x5-pin header, 2 mm pitch) - 1x occupied
Two 4-pin fan connectors (one occupied by the CPU cooling system)
SATA power connectors: 5V (4-pin, occupied) and 12V (3-pin)- Supplied Accessories
Multi-language installation guide (EN, DE, FR, ES, JP, KR, SC, TC)
DVD with Windows driver software and manuals in PDF format
Pre-installed SATA and power cables for one 2.5" drive and one slimline drive
External power adapter with ca. 1.8m AC power cord (with protective-earth contacts)
Protector cap for the CPU socket (do not use if heat-pipe or fan is mounted)
CPU heatpipe cooling system pre-installed with heatsink compound
2 screws (M3x5, silver) for installation of two M.2 cards
8 screws (M3x4, black) for installation of two 2.5" drives
4 screws (M2x2.5, silver) for installation of an optional slimline drive- Optional Accessory
- PS01: Vertical stand
- PV02: VESA mount
- WLN-M (802.11ac, Wifi 5) or WLN-M1 (802.11ax, Wifi 6): WLAN module [4]
- PHD4: 3.5" Hard Disk Rack [8]
- CXP01: adapter cable for external power button
- PCM31: Adapter for three additional RS232 COM ports [3]- Environmental Specifications
Operating temperature range: 0~50°C [7]
Relative humidity range: 10~90% (non-condensing)- Conformity and Certifications
EMI: CE, UKCA, FCC, BSMI, RCM, VCCI
Safety: CB 60950/62368, cTUVus, BSMI
Other: RoHS, Energy Star, ErP
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
(1) 2004/108/EC relating to electromagnetic compatibility (EMC),
(2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD),
(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP)[1] Power-on-after-power-fail:
The BIOS setup provides a "power-on-after-power-fail " function that can be found under "Power Management Configuration". As the name indicates, this function determines the PC's behaviour after power failure: (1) unconditional power on, (2) restore former status or (3) keep system turned off. As a matter of the nature of this function, it may fail after short power failures. This is why this PC also comes with a hardware-based solution. By removing the appropriate jumper JP4, the system will start unconditionally once power is supplied.
[2] How to convert DisplayPort into HDMI/DVI
The DisplayPort output supports Dual-mode (DP++) and can be converted to HDMI or DVI by an additional, passive adapter cable. For example:
DELOCK 82590: 1m, DisplayPort (male, 20p) to HDMI-A (male, 19p)
DELOCK 82435: 5m, DisplayPort (male, 20p) to DVI-D (male, 24p)
The integrated graphics automatically detects the connected display and puts out the appropriate electric signal - either DisplayPort (without an adapter) or HDMI/DVI (with an adapter). Please note that DVI/HDMI monitors are only operated in single-link mode, i.e. max. 1920x1200 with 60 Hz.
However, a monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple, passive adapter.
[3] Optional COM port accessory PCM31
This accessory provides three additional COM ports to the front panel which means the upper bay can no longer be used for an optical drive.
[4] Optional Wireless LAN module:
This slim PC can optionally be upgraded with WLAN/Bluetooth functionality. Shuttle offers the suitable accessory kits "WLN-M" and "WLN-M1", consisting of a WLAN card in M.2-2230 format and two external antennas with appropriate antenna cables.
[5] Intel processors without integrated graphics (ID ends with "F", e.g. Core i7-12700F) are not compatible.
[6] 12V Power connector for SATA drives
The supplied power cables for SATA drives provide a voltage of 5V. Only in very exceptional cases a 2.5" hard disk also requires a 12V line, which is not supported out-of-the-box (only via an optional adapter, included by PHD4).
[7] High ambient temperature
For high ambient temperature over 40°C we strongly recommend to use SSDs instead of hard disk drives.
[8] The optional accessory PHD4 allows for installation of one 3.5" hard drive. However doing so means no other drives such as a slimline DVD drive or a 2.5" HDD/SSD can be used. - Power Adapter
- Spécifications
-
Spécifications
Taille écran Non Alimentation 120W Dimensions 242 x 200 x 73 Chipset Intel H610 Processeur Socket 1700 Mémoire 2 slots DDR4 3200Mhz - max. 32Go Baie de stockage 2 x 2''1/2 interne Lecteur Optique 1x ODD slim Slot extension interne 1 x M.2. 2230 (WiFi) / 1x M.2. 2280 (SATA/PCIe) Contrôleur de Stockage 3 x SATA III Raid - Contrôleur graphique 1 x HDMI / 1 x DisplayPort / 1x VGA Contrôleur réseau 1 x Rj45 2.5G + 1 x Rj45 Gigabit Inteface PS2 Non Ports externes 4 x USB 3.2 / 4 x USB 2.0 Audio Line-In / Line-Out / Mic-In Connecteurs façade Audio In-Out / 2 x USB 3.0 / 2x USB 2.0 Accessoires Intel Alder Lake, USB-C, Triple display, réseau 2.5G, façade ouverte Garantie Shuttle 3 ans Format Slim - Commentaires
-
Un univers de compétences à votre service ...
